MODEL: EEFD16D

EEFD16D Ride-On Battery Industrial Vacuum Cleaner 700mm Cleaning Width

ENDUSTMAN EEFD16D is a ride-on battery vacuum for very large floors, combining a 700mm suction path with a 100L tank and 3-4 hours of cordless runtime per charge.

Key Options	Value
Power	1650 W
Voltage / Phase	Battery Power 48V
Vacuum / Suction	22 kPa^{What is this?}
Tank Capacity	100 L^{What is this?}

Get A QuoteNeed Customization

Specifications

Options	Value
Inlet Diameter	40 mm
Filter Cleaning	Manual Back-flush ^{What is this?}
Noise	^{What is this?}
Filter Area	52800 cm² ^{What is this?}
Weight
Dimensions
MOQ	No Minimum order required
Shipping	Global Delivery, Customs clearance supported
Warranty	1-year warranty with responsive after-sales support.
Key application	Ride-on cordless cleaning for very large plants, warehouses, and workshop aisles without convenient power supply.

Accessories

Standard 40mm Accessory Kit

5 m nylon hose (40mm inner diameter, quick-connect);
Floor nozzle for dry pickup;
Squeegee nozzle for water pickup;
Round brush for delicate surfaces;
Crevice tool for narrow gaps;
Two stainless steel wands — connectable into one long tube.

Hand accessory set for parked cleaning; the 700mm drive-on suction path handles open floors.

See all accessories, hose & power supply options →

Description

The EEFD16D is a ride-on three-wheel industrial vacuum cleaner powered by a 48V lead-acid battery pack (4×80Ah), built for dust and granule collection across very large factories, warehouses, and workshop aisles. The 700mm suction width covers approximately 3,500 m² per hour under ideal conditions — actual efficiency depends on floor conditions, dust load, obstacles, and driving speed. Three 550W brushless DC motors, independently switchable and protected against overheating, drive 22 kPa vacuum through a large 52,800 cm² Toray 0.3μm PTFE-membrane filter, while the standard pre-separator intercepts heavy debris. The 100L quick-release up-and-down tank speeds up emptying, and operators can park anytime to clean corners with the handheld 40mm accessory set. Runtime is 3-4 hours per charge with 6-8 hours slow charging.

Key Features

Ride-on three-wheel design with 700mm effective suction width for very large areas;
Three 550W brushless DC motors, independently switchable, with overheat protection;
48V 4×80Ah lead-acid battery pack; 3-4 hours runtime; 6-8 hours slow charging;
Approximately 3,500 m²/h under ideal conditions; actual efficiency depends on the site;
Toray 0.3μm PTFE-membrane large filter (52,800 cm²), washable and reusable;
Standard pre-separator and 100L quick-release up-and-down tank;
Drive-and-suction cleaning plus parked handheld mode with the 40mm accessory set.