Industrial Vacuum Cleaner

Accessories & Power Supply Options

Every ENDUSTMAN® industrial vacuum cleaner ships with a matched accessory kit, a 5 m hose, and quick-connect fittings sized to the machine. This page lists all standard kits, specialized options, hose and inlet rules, and power supply configurations — including international voltage customization.

40mm Standard Accessory Kit

Standard on single-phase models, three-phase models up to 4 kW, all battery models, EHTS-X / EHTS-C, and pneumatic units. The two steel wands connect into one longer hand tube for extended reach.

Squeegee Nozzle — water pickup
Floor Nozzle — dry pickup
Round Brush — delicate surfaces
Crevice Tool — narrow gaps
Steel Wands ×2 — connectable
5 m Nylon Hose — 40mm ID

50mm Standard Accessory Kit

Standard on three-phase models from 5.5 kW upward. Includes a floor nozzle, round brush, crevice tool, and one steel S-wand. A squeegee nozzle is not included in the 50mm kit.

Floor Nozzle
Round Brush
Crevice Tool
Steel S-Wand ×1
5 m Hose — 50mm ID

Specialized Kits & Options

High temperature kit — High-Temperature Kit

70cm Push Squeegee (P models) — ride-behind wide pickup for large floors, standard on EATD36P / EAFD36P and battery P models; hand tools remain included for corners.
High-Temperature Kit (EHFD-H series) — heat-resistant hose, nozzles, and wands in unified 50mm, required for hot materials up to approx. 300°C. Standard nylon hoses and plastic nozzles must not be used for high-temperature work.
Anti-Static Kit (EHTD-EX / EHFD-EX series) — conductive / anti-static hose, anti-static nozzles, and grounding clamp to reduce static ignition risk in evaluated dust Ex zones.
Pneumatic anti-static configuration (ERT series) — anti-static filter, conductive hose, and grounding options configured per project.

Inlets, Hoses & Custom Diameters

Quick-connect inlets: 40mm and 50mm accessories are interchangeable on standard machines.
Standard hose length is 5 m; longer hoses are available on request and confirmed per model and application.
76mm inlets and accessories can be customized for models from 11 kW upward.
Other diameters and special fittings can be customized for your application — customization starts from a single unit (MOQ 1).

Power Supply & International Voltage

Power Type	Standard Connection	Voltage Options	Typical Lead Time
Single-phase 220V / 50Hz	8 m power cord included	Other voltages on request, confirmed per order	Approx. 15–20 working days
Three-phase ≤ 3 kW	Aviation plug (380V) or 8 m cord on the 220V version	380V standard; 220V compatible; 400 / 415 / 460 / 480V, 50 / 60Hz customizable	Approx. 20 working days
Three-phase ≥ 4 kW	Aviation plug, power cord not included	380V standard; 400 / 415 / 460 / 480V, 50 / 60Hz customizable	Approx. 20 working days
Battery (24V / 48V)	Slow charger included, 6–8 hours per charge	Lead-acid or lithium iron phosphate options per model	No fast charging; do not use while charging
Pneumatic (ERT)	No power supply needed	Runs on on-site 5–9 bar compressed air	—

Free Customization & OEM/ODM

ENDUSTMAN® offers free customization of voltage, tank, and filter configurations, plus OEM/ODM services, starting from a single unit. Tell us your material, dust load, and power conditions, and we will match the machine, kit, and connection to your site.